TP-Link EAP235-Wall Omada AC1200 MU-MIMO Gigabit Wall Plate Access Point

The TP-Link EAP235-Wall is a professional Omada AC1200 Wireless MU-MIMO Gigabit Wall Plate Access Point built for hotels, offices, hospitals, school dormitories, and any multi-room commercial space in India that demands clean, room-level Wi-Fi without ceiling mounts or exposed cabling. If you are searching for the TP-Link EAP235-Wall price India with GST invoice, fast Delhi NCR delivery, and genuine authorized dealer support — you are in the right place. Buy the EAP235-Wall online at Thencix, your trusted TP-Link partner in Nehru Place, Delhi NCR, and get express delivery across India with a valid GST invoice included.

TP-Link EAP235-Wall — India’s Top Wall Plate Access Point for Hotels and Offices

The EAP235-Wall solves one of the biggest Wi-Fi challenges in Indian hospitality and commercial real estate — how to deliver strong, private, per-room Wi-Fi without expensive ceiling cabling or unsightly hardware. At just 15mm thin, this wall plate access point replaces a standard 86mm wall socket faceplate and fits cleanly into existing junction boxes — the same standard used across Indian electrical installations. No extra drilling, no ceiling work, no specialist tools. One Cat6 cable from your PoE switch to the wall box and the room is connected.

Part of TP-Link’s Omada Software Defined Networking (SDN) ecosystem, the EAP235-Wall delivers AC1200 dual-band Wi-Fi — 300 Mbps on 2.4 GHz and 867 Mbps on 5 GHz — along with four built-in Gigabit Ethernet ports that effectively make each unit a mini switch for its room. One downlink port supports PoE pass-through, so you can power an IP phone, CCTV camera, or video intercom directly from the wall plate — eliminating extra power cabling costs per room. Explore our full range of TP-Link networking products at Thencix for complete Omada ecosystem solutions tailored for Indian businesses.

Why the EAP235-Wall Is the Best Hotel WiFi Access Point in India

For Indian hotel and guest house owners, the EAP235-Wall ticks every box. Traditional ceiling-mount access points require drilling, ceiling panels, visible hardware, and separate power cabling per floor — adding ?500–?2000 per room in installation costs alone. The EAP235-Wall eliminates all of this. One per room, mounted into the existing 86mm wall box, powered by PoE from the network closet. Each guest gets a private dedicated Wi-Fi network. Staff and management networks run on separate SSIDs on the same hardware. The cloud-based Omada app handles configuration and monitoring from any smartphone — so your IT team does not need to be on-site.

Whether you are upgrading a 10-room Delhi NCR guest house or deploying Wi-Fi across a 200-room hotel in Mumbai, the EAP235-Wall scales cleanly within the Omada SDN platform. Every unit added is automatically discovered, configured via Zero-Touch Provisioning, and visible in the same Omada dashboard. No per-unit configuration visits. No complex setup. Thencix offers bulk and project pricing on multi-unit EAP235-Wall deployments — WhatsApp us at +91 98911 50949 for a customised quote.

Key Features — TP-Link EAP235-Wall

• AC1200 Dual-Band MU-MIMO Wi-Fi — Fast and Reliable for Every Room: 802.11ac Wave 2 MU-MIMO technology delivers 300 Mbps on 2.4 GHz and 867 Mbps on 5 GHz simultaneously — totalling 1,167 Mbps of combined throughput. MU-MIMO allows multiple devices to receive data at the same time without speed loss, essential for hotel rooms and office cubicles across India where guests and employees connect laptops, smartphones, tablets, and smart TVs simultaneously. Band steering automatically moves 5GHz-capable devices off the crowded 2.4 GHz band for maximum performance without any manual intervention.
• Ultra-Slim 15mm Wall Plate — Fits Standard 86mm Indian Junction Boxes: The EAP235-Wall is the thinnest wall plate access point available — just 15mm, about the thickness of a regular wall socket. It is fully compatible with 86mm junction boxes, the standard used across India, making it the ideal retrofit Wi-Fi upgrade for Indian hotels, apartments, hospitals, and office buildings. The sleek white design blends cleanly into walls — no visible antennae, no ceiling hardware, no aesthetic compromise. Ideal for boutique hotels and premium co-working spaces in Delhi NCR where décor matters.
• 4 Gigabit Ethernet Ports with PoE Pass-Through — One Cable Does Everything: Equipped with one Gigabit uplink port (802.3af/at PoE powered) and three Gigabit downlink ports, the EAP235-Wall is both a wireless access point and a 4-port mini switch for each room. One downlink port supports PoE pass-through up to 13W (requires 802.3at input), allowing you to power a VoIP phone, IP security camera, or video intercom directly from the wall plate — no additional power socket or adapter needed per device. For Indian hotel deployments pairing Wi-Fi with IP cameras, this dramatically reduces per-room installation cost and complexity.
• Omada SDN — Centralized Cloud Management for Multi-Room Deployments: The EAP235-Wall integrates natively into TP-Link’s Omada SDN platform, providing Zero-Touch Provisioning and centralized management across dozens or hundreds of units from a single cloud dashboard. IT teams in Delhi NCR can monitor, configure, and troubleshoot every EAP235-Wall across a building — or across multiple sites — without leaving the office. The free Omada app works on any Android or iOS smartphone. No per-device configuration on-site. No proprietary controllers required for small deployments.
• Up to 16 SSIDs — Separate Networks for Guests, Staff, and IoT: The EAP235-Wall supports up to 16 SSIDs (8 per band) on the same hardware. Indian hospitality and office operators can run completely separate networks for paying guests, admin staff, back-office PCs, and IoT devices — all on one EAP235-Wall per room, with full network isolation between each. Guest network login supports SMS authentication, Facebook Wi-Fi, voucher-based access, and customisable captive portals — giving Indian hotel owners full control over who accesses their Wi-Fi and for how long.
• PoE Powered — No Electrician Required at Each Room: The entire EAP235-Wall is powered through the Cat6 uplink cable using 802.3af or 802.3at PoE — no separate power adapter or electrical socket needed at each installation point. For Indian hotels and apartment buildings where adding new power sockets is expensive, disruptive, and requires licensed electrical work, this is a major cost saving. Run a single Cat6 cable from your PoE switch in the main networking closet to each room’s 86mm junction box. That is all the installation required.
• Advanced Wireless Technologies — Beamforming, Band Steering, Load Balancing: Beamforming focuses the Wi-Fi signal directly toward connected client devices rather than broadcasting in all directions, delivering a stronger signal through walls in room-by-room deployments. Airtime fairness prevents slower legacy devices from degrading Wi-Fi quality for faster modern devices — critical in Indian hotels where guests bring a wide range of device types. Load balancing distributes client connections evenly across multiple EAP235-Wall units in a multi-AP deployment so no single unit becomes a bottleneck during peak usage.
• Seamless Roaming — Wi-Fi That Follows You Across Rooms: When deployed as part of an Omada SDN network, the EAP235-Wall supports fast and seamless roaming — mobile devices maintain uninterrupted connectivity as users move between rooms, floors, and buildings. VoIP calls, video conferences, and real-time applications continue without dropping when employees move within an Indian office campus or hotel staff move across floors. This is a critical enterprise feature often missing from budget access points sold on Amazon India at similar price points.

Technical Specifications — TP-Link EAP235-Wall

Package Contents

• 1× TP-Link EAP235-Wall Omada AC1200 Wall Plate Access Point
• 1× Mounting Bracket
• Mounting screws and hardware
• 1× Quick Installation Guide
• Note: PoE switch or PoE injector NOT included — required to power the unit. A minimum 802.3af PoE switch/injector is needed for basic operation; 802.3at (PoE+) is required to use the PoE pass-through feature.
• Note: Omada Controller NOT included — the EAP235-Wall can operate standalone for small deployments, or with an Omada Hardware Controller (OC200/OC300) or free Omada Software Controller for centralized multi-unit management.

Wall Plate AP vs Ceiling AP — Which Is Right for Your Indian Deployment?

A common question from Indian hotel owners, IT managers, and network installers is whether to choose a wall plate access point like the EAP235-Wall or a traditional ceiling-mount AP. The answer depends on your environment:

Choose the EAP235-Wall (wall plate AP) when: You have multiple small, separated rooms (hotel rooms, office cabins, hospital wards, dormitory rooms). Each room needs its own private Wi-Fi network. Ceiling cabling is expensive, impractical, or aesthetically unsuitable. You want to power IP phones or cameras directly from the wall plate. Your building already has Cat6 runs to 86mm wall boxes.

Choose a ceiling-mount AP when: You have large, open floor spaces (lobbies, conference halls, open-plan offices, restaurants). You need maximum coverage radius from a single unit. No existing 86mm wall box infrastructure is present.

For most Indian hotels, guest houses, and multi-room office floors, the EAP235-Wall delivers better per-room performance, lower installation cost, and a cleaner aesthetic than ceiling-mount alternatives. Browse our complete Access Point range at Thencix to compare all options for your project.

Ideal Use Cases — EAP235-Wall for Indian Businesses

• Hotels and Guest Houses in Delhi NCR: One EAP235-Wall per room eliminates the need for Wi-Fi extenders and solves dead-zone complaints permanently. The guest portal with SMS or voucher login gives hotel owners full control over internet access. Thencix offers project pricing for multi-room hotel deployments across Delhi, Noida, Gurgaon, and Faridabad — WhatsApp +91 98911 50949.
• Corporate Offices and Co-Working Spaces: Deploy one unit per cabin, conference room, or cubicle cluster. PoE pass-through powers the VoIP desk phone from the same wall plate. Separate SSIDs for employees, guests, and IoT devices on the same hardware. Seamless roaming keeps calls connected when staff move between rooms.
• Hospitals and Clinics: The flush wall-plate design meets infection control requirements better than ceiling-mount units. Each ward, consultation room, and OT can have its own isolated network. Centralized management from IT allows configuration changes without disturbing clinical operations.
• School and College Dormitories: Per-room Wi-Fi with bandwidth controls and time-based access schedules. Voucher-based guest portal for visitor access. Cloud monitoring lets hostel administrators detect misuse across all units in real time.
• B2B Bulk Deployment — Hotels, Apartments, Campuses: Thencix supplies EAP235-Wall units for multi-room project deployments with GST invoice, project pricing, and post-installation WhatsApp support. Contact our team at sales@thencix.com or +91 98911 50949 for a bulk quote.

Why Buy the TP-Link EAP235-Wall from Thencix?

Thencix is your reliable source for genuine networking equipment — every router, switch, and access point is specification-verified, securely packed, and fully supported.

• 100% authentic TP-Link products — not grey market or refurbished
• Valid GST invoice with every order — claim full input tax credit
• Fast delivery across India — express dispatch for Delhi NCR orders
• Cash on Delivery available
• In Stock — no backorder delays
• Bulk and project pricing for multi-unit hotel and office deployments
• In-house warranty support — we handle TP-Link warranty on your behalf
• WhatsApp pre-sale and post-sale support at +91 98911 50949
• Located at 109B Osian Building, 12 Nehru Place, Delhi 110019

Contact:
Email: sales@thencix.com
WhatsApp: +91 98911 50949